Injection valve
Injection valve for safe connection of a dosing line.
Equipped with "ball-valve" check valve
Standard PVDF-FP but also PP-EP available.
Model: 1/2" 4×6(PVDF+FP+CE+C276)
From
€21,00 Ex VAT
All our dosing pumps, controllers etc. are also available with a private label. Want to know more? View the conditions.
 |
✓ 5 year warranty ✓ Fast, worldwide shipping ✓ Large stock |
Injection valve
An injection valve is placed on the discharge line of a dosing pump and can be screwed into a connection. For example in a drilling saddle or T-piece.
Standard are a PVDF housing, Viton or EPDM O-rings, ceramic check valves and C267 springs, but other materials are available.
Note: The standard injection valves have a standard back pressure of 0.3 bar. Other pressures available.
This injection valve is available with 1/2″ and 3/4″ threads.
Injection valve characteristics
- 1/2″ or 3/4″ thread
- Throughput 4x6mm to 13x16mm
- Version: 1/2″ 4x6mm PVDF-FP
- "ball valve" check valve
In the table below you can see which versions are available. In the table you can select a number of these products. Can't find the pump you want? Then please contact us.
| 1/2″ injection valve (mm hose connection inside out) | 3/4″ injection valve (mm hose connection inside out) | ||
|---|---|---|---|
| Available at Implementation | 4×6 mm (SS+FP+SS) (AISI316) 6×8 mm (SS+FP+SS) (AISI316) 4×6(PVDF+FP+CE+C276) 8×10(PVDF+FP+CE+C276) 8X12(PVDF+WAX+CE) 8X12(PP+EP+CE) 12×18(PVDF+FP+CE+C276) 12×18(PVDF+EP+CE+C276) 12X18 (PVDF+WAX+CE) 12X18(PP+EP+CE) | 13×16 mm (PVDF+FP+CE+C276) 13×16 mm (PVDF+EP+CE+C276) 8×10(PVDF+FP+CE+C276) 8×10(PVDF+EP+CE+C276) 8X10 (PVDF+WAX+CE) 8X12(PP+EP+CE) 12X18(PP+EP+CE) 13X16 (PVDF+WAX+CE) | |
English 
Dutch 
French