Emec CatCit Water Meter

Emec CATCIT | Pulse Water Meter for Corrosive Liquids at High Temperature

A water meter with pulse generator is placed in the water pipe. The water meter gives an x number of pulses per litre. These pulses can be used by a suitable metering pump to dose very precisely into the water supply. In this way, it is possible to obtain an 1%-like solution, for example. Control by ppm is also possible this way. The dosing pump adjusts itself when the flow increases or decreases. So you always have the right dosage. In addition, this water meter comes with a dry dial. This is useful when there is some contamination in the water, for clean drinking water a wet dial can be used if required. Note! If you want the water meter to communicate with the dosing pump, you need a dosing pump with MF (Multifunction) configuration.

Features

• Maximum water temperature: 90^oC
• Maximum pressure: 16 bar.
• Internal and external PTFE (Teflon) coating
• 2.5m cable included
• Various grommet sizes and designs available, see list below.

What versions a connections are available?

In the list below, you can see which versions are available. Not quite sure which water meter you need? Then please contact us.

• CATCIT 15: This model features a 15 mm connection (1/2 inch)
• CATCIT 20: This model features a 20 mm connection (3/4 inch)
• CATCIT 25: This model features a 25 mm connection (1 inch)
• CATCIT 30: This model features a 30 mm connection (1.1/4 inch)
• CATCIT 40: This model features a 40 mm (1.1/2 inch) connection
• CATCIT 50: This model features a 50 mm (2-inch) connection