Chlorine pump high flow

Description Versions Description

Emec chlorine pump for high flow

When high-volume chlorine dosing is needed, then the motor-driven Prius metering pump is an excellent choice. This dosing pump can dose up to 1000 litres per hour at 5 bar, depending on the version. The high-quality materials make this pump also suitable for higher chlorine concentrations. The full PTFE diaphragm i.c.w. the PVDF pumphead are very long-lasting. A model with proportional control is also available, e.g. via 4-20 mA, Volt on pulse signal. Model offered: Prius D 10-105 with 3-phase motor(10 bar-105 litres per hour). Note: above a chlorine concentration of 32.5%, it is recommended to take PVDF hoses. Even higher flows? We can supply those too. In that case, please get in touch! For other questions or to place an order, please contact us.

High-flow chlorine pump features

• Complete with electric motor
• Adjustable stroke length
• Manual venting
• Supplied with complete kit (2 m pressure and suction hose 2 m venting hose (PE), injection nipple and suction filter)
• For pumps from 240 l/h onwards, an installation kit is optional.
• 1-phase also available.

Emec Prius D MF ? proportionally controllable chlorine pump

• Proportional control via 4-20 mA ? 0-10V etc. Possible in combination with water meter for ppm or percentage solution

Available flow and pressure Prius D 50 Hz PVDF FP 3-phase?

Pressure (Bar)	Flow (l/hour)
10	60
10	105
05	240
05	530
05	750
05	1000

Versions In the table below you can see which versions are available. Can't find the pump you want? Then please contact us.

	Prius D 50 Hz 3-phase high-flow chlorine pump
Description	Constant dosing system for chlorine
Features	Manually adjustable stroke length Motor-driven metering pump
Features	Constant
Available motors Depending on type	0.37 kW 220/380 V 3-phase 0.18 kW 220/380 V 3-phase 0.55 kW 220/380 V 3-phase 0.37 kW 220 V single-phase 0.55 kW 220 V single-phase