Looking to buy an Iwaki metering pump? Comparing is always a good idea.
Iwaki is a Japanese manufacturer that has been developing and producing dosing pumps since 1959. In Europe, Iwaki has been active since 1985 by setting up its European headquarters in Germany at the time.
The company supplies a diverse product range with many different types of pumps, from small to large and from simple to complex
Of course, you may be exploring the market and looking for an alternative to a Iwaki metering pump.
On this page, we would like to introduce some alternatives from Italian company Emec for commonly used types of Iwaki dosing pump. Emec is comparable in quality, has competitive prices and gives a 5-year warranty on pumps and controllers.
Alternative for Iwaki dosing pump
It is often difficult to make a comparison when it comes to dosing. There are very many different specifications and options. To make this easier, on these pages we have compared some commonly used Iwaki dosing pumps against Emec dosing pumps.
Need help with your choice?
Don't feel like ploughing through a whole story but just need good advice on a metering pump? We are happy to help you find the right pump. Contact us on 0164 770 865 or use our contact form by pressing the button below.
What can we help you with?
Comparing Iwaki EJ-B with Emec VMS MF
The Iwaki EJ-B is a simple to control metering pump with three functions. Constant, pulse and standby. An alternative to this pump is the Emec VMS MF. The table below gives a clear comparison between these two pumps.
Emec VMS MF | Iwaki EJ-B | |
---|---|---|
Features | ||
Pressure (Bar) | 2 to 15 bar | 1.5 to 12 bar |
Capacity (L/hour) | 2 to 15 litres/hour | 1.14 to 12 litres/hour |
Maximum stroke rate per minute | 180 | 360 |
Digital display | Yes | Yes |
Function | ||
Constant | Yes | Yes |
Proportional analogue input | Yes | No |
4-20 mA | Yes | No |
0-20 mA | Yes | No |
Set points adjustment (mA) | Yes | No |
Digital pulse output | Yes | Yes |
Divide | 1-999 | No |
Multiply | 1-10 | No |
Stroke distributor | Yes | Yes |
Set maximum speed | No | Yes |
PPM | Yes | No |
% | Yes | No |
ML/q | Yes | No |
Volt | Yes | No |
Batch | Yes | No |
Upkeep mode | Yes | No |
Pulse/pause mode | Yes | Yes |
Overflow alarm | Yes | No |
Additional inputs/outputs | ||
Alarm output | Yes | No |
Level input | Yes | No |
Standby input | No | Yes |
Comparing Iwaki EWN with Emec KMS MF
The Iwaki EWN and the Emec VMS MF have similar functions and features. There are some minor differences between the two dosing pumps which you can see set against each other in the table below.
Emec KMS MF | Iwaki EWN | |
---|---|---|
Features | ||
Pressure (Bar) | 2 to 15 bar | 2 to 10.3 |
Capacity (L/hour) | 4 to 18 litres/hour | 2.3 to 25.2 litres/hour |
Maximum stroke rate per minute | 180 | 360 |
Manually adjustable stroke length | Yes | Yes |
Digital display | Yes | Yes |
Function | ||
Constant | Yes | Yes |
Proportional analogue input | Yes | Yes |
4-20 mA | Yes | Yes |
0-20 mA | Yes | Yes |
Set points adjustment (mA) | Yes | Yes |
Digital pulse output | Yes | Yes |
Divide | 1-999 | 1-9999 |
Multiply | 1-10 | 1-9999 |
Stroke distributor | Yes | No |
Set maximum speed | No | Yes |
PPM | Yes | No |
% | Yes | No |
ML/q | Yes | No |
Volt | Yes | No |
Batch | Yes | No |
Self-printing | Yes | Yes |
Feed verification and self-adjustment | No | Yes |
Automatic repriming | Yes | No |
Upkeep mode | Yes | No |
Pulse/pause mode | Yes | Yes |
Overflow alarm | Yes | No |
Additional inputs/outputs | ||
Alarm output | Yes | No |
Pulse output | No | Yes |
Level input | Yes | No |
Standby input | Yes | Yes |
About Emec Metering Pumps
Emec is an Italian company that has specialised in dosing systems and measuring equipment for chemicals for over 35 years. This extensive experience and passion for the product is reflected not only in the reliability and innovation of the dosing systems, but also in customer focus. For example, Emec offers a 5-year warranty* (!) as well as excellent after-sale support.
* Warranty applies to the equipment and diaphragm only. Not for the wet parts such as the pump head.
Comparing Iwaki EH-E with Emec AMS MF
Comparing the Iwaki EH-E and the Emec AMS MF, we see that the Iwaki can deliver a higher capacity with its 360 strokes per minute. In contrast, the Emec AMS MF has more features, has automatic venting and can deliver higher pressure. The table below gives a complete picture of both metering pumps.
Emec AMS MF | Iwaki EH-E | |
---|---|---|
Features | ||
Pressure (Bar) | 2 to 15 bar | 2 to 10.3 |
Capacity (L/hour) | 10 to 60 litres/hour | 20.4 to 75 litres/hour |
Maximum stroke rate per minute | 120 | 360 |
Function | ||
Constant | Yes | Yes |
Proportional analogue input | Yes | Yes |
4-20 mA | Yes | Yes |
0-20 mA | Yes | Yes |
Set points adjustment (mA) | Yes | Yes |
Digital pulse output | Yes | Yes |
Pulse input memory | Max. 255 | |
Divide | 1-999 | 1-9999 |
Multiply | 1-10 | 1-9999 |
Stroke distributor | Yes | No |
Set maximum speed | No | Yes |
PPM | Yes | No |
% | Yes | No |
ML/q | Yes | No |
Volt | Yes | No |
Batch | Yes | No |
Automatic repriming | Yes | No |
Upkeep mode | Yes | No |
Pulse/pause mode | Yes | No |
Overflow alarm | Yes | Yes |
Additional inputs/outputs | ||
Alarm output | Yes | No |
Level input | Yes | No |
Standby input | Yes | Yes |
Comparing Iwaki IX-B with Emec Prisma
Comparing the Iwaki IX-B and the Emec Prisma, there are many similarities. The Emec Prisma is a recent model from this Italian manufacturer and features a very diverse range of control and programming options.
See the table below for the full comparison!
Emec Prisma | Iwaki IX-B | |
---|---|---|
Features | ||
Pressure (Bar) | 4 to 25 bar | 4 to 17 |
Capacity (L/hour) | 5 to 80 litres/hour | 7.5 to 45 litres/hour |
Function | ||
Constant | Yes | Yes |
CC/Pulse | Yes | Yes |
Pulse/pause mode | Yes | Yes |
mA 0-20/4-20 | Yes | Yes |
PPM | Yes | Yes |
% | Yes | No |
ML/q | Yes | No |
Volt | Yes | No |
Batch | Yes | No |
Additional inputs/outputs | ||
Slow mode | Yes | No |
Number of alarms | 1 | 2 |
Communication modules | Optionally equipped with Modbus and Bluetooth | Profibus DP |
Pressure sensor | Built-in overpressure sensor linked to the stepper motor | Leak detector |